给机房设备从核心到汇聚配置端口汇聚

前期工作，做端口汇聚首先要确定要做配置的端口速率一致，然后购买AOC有源光缆，最好买一样的线缆

配置如下,让华为做主动段，锐捷做被动端

HUAWEI端口汇聚

interface eth-trunk 3
mode lacp
interface xg5/0/0
eth-trunk 3
interface xg5/0/1
eth-trunk 3
interface eth-trunk 3
port link-type trunk
port trunk allow-pass vlan all

ruijie端口汇聚

interface range TenGigabitEthernet 0/31-32
port-group 1 mode passive
interface aggregateport 1 
swithport mode trunk

可以看到端口都正常，这里只是线颜色不一样，型号是一致的

dis eth-trunk 3

Eth-Trunk3's state information is:
Local:
LAG ID: 3                   WorkingMode: LACP
Preempt Delay: Disabled     Hash arithmetic: According to SIP-XOR-DIP
System Priority: 32768      System ID: 04f9-38a6-0550
Least Active-linknumber: 1  Max Active-linknumber: 8
Operate status: up          Number Of Up Port In Trunk: 2
--------------------------------------------------------------------------------
ActorPortName          Status   PortType PortPri PortNo PortKey PortState Weight
XGigabitEthernet5/0/1  Selected 10GE     32768   1      833     10111100  1
XGigabitEthernet5/0/0  Selected 10GE     32768   2      833     10111100  1

Partner:
--------------------------------------------------------------------------------
ActorPortName          SysPri   SystemID        PortPri PortNo PortKey PortState
XGigabitEthernet5/0/1  32768    c0b8-e6fa-e145  32768   32     1       00111100
XGigabitEthernet5/0/0  32768    c0b8-e6fa-e145  32768   31     1       00111100